3D 12 Line Laser Levels

Product Details

● 3 X 360 Degree WITH FLOOR LINE LASER: This laser tool operate one 360° horizontal floor laser line for tiling installation at a 2/5" distance. With the lifting base, the 360° floor laser can raise from the surface to adjust over and travel past uneven surfaces or obstructions between 1" and 3.15" height. Two vertical lines cross at 90°angles which to makes user quickly visualize and finish square layout. This 360 laser level is a complete tool for covering different areas which are including the floor, wall, ceiling all around the room.

● MULTIFUNCTIONAL LASER TOOL: The remote control which can select three 360° laser lines individually while at a distance up to 33Ft. With smart pendulum, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. The laser tool will reminding the user once when out of self-leveling range ±4°. Once pendulum locked, it switches to manual mode and to lock lines for use at any angle. Pulse mode which expanding laser range up to 200Ft. with Huepar Laser Receiver.

● DUAL POWER METHODS&TYPE-C PORT: Huepar laser tool employed large capacity lithium battery (the user can be easily purchase at local market) for 6 hours use with full beams on. An extra battery is included for backup. Besides, this laser tool can be used at job site by plugged in when take out the battery. With Type-C charging port, the laser level can also be charged with lot of electric products, such as phone, laptop, power bank, car charger, etc. Users can charge the battery independently with the battery charger included.

● MAGNETIC BRACKET&MOUNTING THREADS: The strong magnetic bracket can be quickly positioned to the metal surface, this helps to hang the laser level for wall applications. The four fine-tuning knobs on the bracket can adjust the left and right position, the front and rear position and the vertical angle against the wall within 4.8 inches. The laser tool comes with a 5/8"-11 internal thread to 1/4"-20 external thread adapter and 1/4"-20 mounting thread, suitable for standard tripod or pole mounting.

Lines Switching

Short press the button(H and V) on the keypad,which to switch the Horizontal and Vertical laser lines separately. The remote control enables to chose three 360° laser lines individually while at a distance up to 33Ft. In manual mode, once all laser lines are switched off while the indicators are still on, the laser tool will shut off after about 4 minutes of inactivity. The laser line(s) can be temporarily turned off by the remote control once you need to leave for a while.

Self-leveling mode & Manual mode

Self-leveling mode

While the laser tool is switch to the unlocked position, self-leveling mode is starting. The laser beam will blink continuously at 2Hz once the tool is over the normal self-leveling range (4°±1°)It will remind the user.

Manual mode

Once the pendulum lock is in locked position, manual mode locks laser lines which for use at any angle to operate non-level straight lines. The laser beam will reminding each 3-5 seconds for you that it's not in the self-leveling mode now.

Pulse Mode

Turn ON pulse mode button: After power on, short press the power button to turn on the pulse mode. The indicator will light up in blue.

Pulse mode extends the working range up to 200Ft. in brighter working conditions when using with Huepar Line Laser Receiver.

Keep the pulse mode on once using with a receiver.

The laser tools is compatible with Huepar LR-6RG&LR-5RG Line Laser Receiver only.

http://www.levelsure.com/